Home     |     Site Map    
   
   
TN100 Modules

Overview

The TN100 modules series are intended to be used in applications where extremely robust RF link is demanded or ranging capabilities a required. The modules are based on transceiver capable of chirp spread spectrum modulation communication. A powerful 32bit microcontroller enables complex protocol stacks and application to be run.

 

Features

  • TN100 Module
    • High performance Chirp based wireless technology
    • Operates in the unlicensed 2.4 GHz ISM Band
    • Selectable data rate up to 1 Mbps
    • One wide frequency channel of 80 MHz or
    • Selectable narrow band channels of 22 MHz
    • High precision ranging better than 1 meter*
    • Powerful STM32F103 microcontroller on board
    • 128 kB of Flash and 20 kB of SRAM
    • JTAG and SWD interface for programming and debuging
  • Peripherals
    • Serial interfaces SPI, USART and I2C
    • 2 x 16-bit timers
    • DMA controller
  • Standard modules
    • TX Power: 0 dBm*
    • Indoor range: up to 30 m*
    • Outdoor range: up to 300 m*
  • PA modules
    • TX Power: 20 dBm*
    • Indoor range: up to 300 m*
    • Outdoor range: up to 2000m*
  • RF Options
    • Chip antenna, U.FL connector and single port 50 Ohms RF pad
    • Shielding on demand

Tested for European Regulations and FCC, certification planned.
* Obtained in optimal conditions.

Tech Spec

  • Supply voltage: 3 V to 5 V
  • Frequency: 2400 MHz, 2483.5 MHz
  • Wide frequency band: 80 MHz occupation
  • Narrow frequency band: 22 MHz occupation
  • Maximum data rate: 1 Mbps
  • RF output power, basic version: 0 dBm
  • RF output power, PA version: +20 dBm
  • Dimensions: 20 x 35 x 2 mm (0.8 x 1.4 x 0.08 in)
  • Temperature range: -40° to +85°C (-40° to +185° F)



Factsheet (Datasheet in Download section)


top